Friday, November 28, 2008


k, getting to the final design phase of this phaser
going with the 4Ux3U box idea
will need to use a wallwort

the box will probably be 1mm steel folded and welded to shape
top will be open, just some edges bent over to allow the face plate to clamp down
as well as the oblig, wood sides :)

i've got an image here showing how the pcb and jacks fit into the box
i hope that the pcb can be mounted so that there is verticale room to mount the jacks on the back pane of the box.. there should be.

No comments: